One of the project I recently finished was a set of re-useable snack bags. I get really frustrated with the amount of trash generated by my family. One of the components is ziploc baggies (also I have to remember to buy them at the store….and I never do…and then I don’t have snack baggies…). I looked around at lots of tutorials and came up with my own process. Here we go.
These are super easy if you have a serger. If you don’t you can still do it, but it’s going to involve zig-zagging and turning and stuff.
I made mine all different with scraps. What I did buy was rip-stop nylon to line the inside. This gives them a little water resistance (they aren’t at all waterproof, so don’t use them for soup or yogurt). Let’s make a guess. Get about a yard of nylon and a yard of cotton. I think.
Okay. Let’s get going.
For each bag….
Out of both the cotton and the nylon, cut rectangles the width you want your bag, plus seam (let’s say 6 1/2″), and twice as long as you want your bag to be plus 2 inches (let’s say 8+8+2=18″). I eyeballed this on most of my bags, and I made a variety of sizes, so these measurements are just ideas.
Finish the rest of your serging and make a whole set of these things. You will need a standard sewing machine next. All you need to do is add velcro to the openings. I used a zig-zag on the sticky side of the velcro because that was just easier.
Shazam!! A snack baggie!
So I have a set of 4 snack baggies for one lucky winner!
I’m doing this giveaway on my Facebook Page. It’s really easy. Click over to my page, like my page (if you don’t already), and leave a comment on the giveaway post telling me what you would like to use these bags for – hiking and trail mix, sack lunches and sandwiches…extra peanuts for a ball game?
I’ll pick a random winner from the comments next Friday (August 15th).
That’s it! Fun and easy, right?